Snowflake Ornaments and a Challenge Update

My latest Crafty Christmas Tree ornaments are these delicate looking snowflakes made from- can you guess what...

coffee filters!

But they've been stiffened to make them more rigid and ornament like. And as an added bonus the fabric stiffening medium I used gave the filters a semi-translucent icy look.

As you probably already know I love to craft with coffee filters. (As demonstrated by this post, this post, this post, this post, and this post) Not only are they cheap but they're so versatile. And at only a dollar for pack of 200, they were definitely on my list of materials for the tree.

Now you've probably seen more than one tutorial on how to cut snowflakes from coffee filters so I'm just going to give you a brief overview of those steps.

Step One: First smooth the filter out so it's flat. Then fold in half. Fold in half again, so it's in quarters. And then fold in half one more time.

Step Two: Use a craft knife to cut the folded filter.

I made some cuts along the edges and inside the middle to get a really detailed and delicate looking flake.

After you're done cutting unfold to reveal your beautiful flake. I cut each one randomly so no two are alike- just like real flakes.

Next it's time to stiffen the filters up with fabric medium. I used Plaid's Stiffy product but I'm sure any liquid (paint on) fabric medium would work.

Step Three: Lay the snowflake on some wax paper, pour on some drops of fabric medium, and smooth the medium over the entire filter. I used my finger instead of a brush, that way I didn't bend or fold any of the delicately cut areas.

Step Four: Carefully pick up/peel up the flake and transfer it to something plastic to dry.

For my plastic surface I cut the top and two sides off of large plastic storage bag. Unfolded it and taped the edges down to be sure it stayed flat. That gave me a fairly large plastic area that held 4 snowflakes at one time.

Don't be afraid to pick up the flakes. They will feel very delicate and the arms will probably flop over and stick together- but that's ok because once it's on the plastic you can smooth it out so it's nice and flat and smooth again.

Transferring the flake this way is important for two reasons. One- If you let the flake dry on waxed paper it will be very hard to peel off (ask me how I found that out). And two- If you don't transfer the flake to another surface after spreading the fabric medium on you won't get a flake with open cutout areas. You'll get one that looks like this- see how most of the cutout areas are filled in.

Step Five- Once the flake was dry I gave it another coat of fabric medium by repeating steps three and four. This second coat helps to really make the snowflakes rigid.

Last but not least, I used some of the red embroidery floss, leftover from my last Christmas Tree project, to hang my flakes.

I can't wait to see how they look on the tree! So far I've made about 14- but I'll probably make more.